Swain, M. V. Shape memory behaviour in partially stabilized zirconia ceramics. Nature 322, 234–236 (1986).
Lai, A., Du, Z., Gan, C. L. & Schuh, C. A. Shape memory and superelastic ceramics at small scales. Science 341, 1505–1508 (2013).
Zeng, X., Du, Z., Schuh, C. A. & Gan, C. L. Enhanced shape memory and superelasticity in small-volume ceramics: a perspective on the controlling factors. MRS Commun. 7, 747–754 (2017).
Du, Z., Zhou, X., Ye, P., Zeng, X. & Gan, C. L. Shape-memory actuation in aligned zirconia nanofibers for artificial muscle applications at elevated temperatures. ACS Appl. Nano Mater. 3, 2156–2166 (2020).
Lai, A. & Schuh, C. A. Direct electric-field induced phase transformation in paraelectric zirconia via electrical susceptibility mismatch. Phys. Rev. Lett. 126, 15701 (2021).
Pang, E. L., Olson, G. B. & Schuh, C. A. The mechanism of thermal transformation hysteresis in ZrO2-CeO2 shape-memory ceramics. Acta Mater. 213, 116972 (2021).
Gu, H. et al. Exploding and weeping ceramics. Nature 599, 416–420 (2021).
Jetter, J. et al. Tuning crystallographic compatibility to enhance shape memory in ceramics. Phys. Rev. Mater. 3, 093603 (2019).
Song, Y., Chen, X., Dabade, V., Shield, T. W. & James, R. D. Enhanced reversibility and unusual microstructure of a phase-transforming material. Nature 502, 85–88 (2013).
Cui, J. et al. Combinatorial search of thermoelastic shape-memory alloys with extremely small hysteresis width. Nat. Mater. 5, 286–290 (2006).
Zarnetta, R. et al. Identification of quaternary shape memory alloys with near-zero thermal hysteresis and unprecedented functional stability. Adv. Funct. Mater. 20, 1917–1923 (2010).
Pang, E. L., Olson, G. B. & Schuh, C. A. Role of grain constraint on the martensitic transformation in ceria-doped zirconia. J. Am. Ceram. Soc. 104, 1156–1168 (2020).
Christian, J. W., Olson, G. B. & Cohen, M. Classification of displacive transformations: what is a martensitic transformation? J. Phys. IV 5, C8-3–C8-10 (1995).
Krauss, G. Martensite in steel: strength and structure. Mater. Sci. Eng. A 273–275, 40–57 (1999).
Bhattacharya, K. Microstructure of Martensite: Why It Forms and How It Gives Rise to the Shape-Memory Effect (Oxford Univ. Press, 2003).
Kelly, P. M. & Francis Rose, L. R. The martensitic transformation in ceramics—its role in transformation toughening. Prog. Mater Sci. 47, 463–557 (2002).
Wechsler, W. S., Lieberman, D. S. & Read, T. A. On the theory of the formation of martensite. Trans. AIME 197, 1503–1515 (1953).
Bowles, J. S. & Mackenzie, J. K. The crystallography of martensite transformations I. Acta Metall. 2, 129–137 (1954).
Mackenzie, J. K. & Bowles, J. S. The crystallography of martensite transformations II. Acta Metall. 2, 138–147 (1954).
Bowles, J. S. & Mackenzie, J. K. The crystallography of martensite transformations III. Face-centred cubic to body-centred tetragonal transformations. Acta Metall. 2, 224–234 (1954).
Ball, J. M. & James, R. D. Fine phase mixtures as minimizers of energy. Arch. Ration. Mech. Anal. 100, 13–52 (1987).
Chen, X., Srivastava, V., Dabade, V. & James, R. D. Study of the cofactor conditions: conditions of supercompatibility between phases. J. Mech. Phys. Solids 61, 2566–2587 (2013).
Zhang, Z., James, R. D. & Müller, S. Energy barriers and hysteresis in martensitic phase transformations. Acta Mater. 57, 4332–4352 (2009).
Delville, R. et al. Transmission electron microscopy study of phase compatibility in low hysteresis shape memory alloys. Philos. Mag. 90, 177–195 (2010).
Meng, X. L., Li, H., Cai, W., Hao, S. J. & Cui, L. S. Thermal cycling stability mechanism of Ti50.5Ni33.5Cu11.5Pd4.5 shape memory alloy with near-zero hysteresis. Scr. Mater. 103, 30–33 (2015).
Pop-Ghe, P., Stock, N. & Quandt, E. Suppression of abnormal grain growth in K0.5Na0.5NbO3: phase transitions and compatibility. Sci. Rep. 9, 19775 (2019).
Liang, Y. G. et al. Tuning the hysteresis of a metal-insulator transition via lattice compatibility. Nat. Commun. 11, 3539 (2020).
Wegner, M., Gu, H., James, R. D. & Quandt, E. Correlation between phase compatibility and efficient energy conversion in Zr-doped barium titanate. Sci. Rep. 10, 3496 (2020).
Gopakumar, A. M., Balachandran, P. V., Xue, D., Gubernatis, J. E. & Lookman, T. Multi-objective optimization for materials discovery via adaptive design. Sci. Rep. 8, 3738 (2018).
Chen, Y. et al. Machine learning assisted multi-objective optimization for materials processing parameters: a case study in Mg alloy. J. Alloys Compd. 844, 156159 (2020).
Kriven, W. M., Fraser, W. L. & Kennedy, S. W. in Science and Technology of Zirconia, Advances in Ceramics Vol. 3 (eds. Heuer, A. H. & Hobbs, L. W.) 82–97 (American Ceramic Society, 1981).
Lukas, H. L., Fries, S. G. & Sundman, B. Computational Thermodynamics: The Calphad Method (Cambridge Univ. Press, 2007).
Saenko, I., Ilatovskaia, M., Savinykh, G. & Fabrichnaya, O. Experimental investigation of phase relations and thermodynamic properties in the ZrO2–TiO2 system. J. Am. Ceram. Soc. 101, 386–399 (2018).
Wang, C., Zinkevich, M. & Aldinger, F. The zirconia-hafnia system: DTA measurements and thermodynamic calculations. J. Am. Ceram. Soc. 89, 3751–3758 (2006).
Park, J. et al. Thermodynamic assessment of the ZrO2-TiO2 system. Korean J. Ceram. 7, 11–15 (2001).
Xue, D. et al. Accelerated search for materials with targeted properties by adaptive design. Nat. Commun. 7, 11241 (2016).
Trehern, W., Ortiz-Ayala, R., Atli, K. C., Arroyave, R. & Karaman, I. Data-driven shape memory alloy discovery using artificial intelligence materials selection (AIMS) framework. Acta Mater. 228, 117751 (2022).
Pang, E. L., McCandler, C. A. & Schuh, C. A. Reduced cracking in polycrystalline ZrO2-CeO2 shape-memory ceramics by meeting the cofactor conditions. Acta Mater. 177, 230–239 (2019).
Gu, H., Bumke, L., Chluba, C., Quandt, E. & James, R. D. Phase engineering and supercompatibility of shape memory alloys. Mater. Today 21, 265–277 (2018).
Chluba, C. et al. Ultralow-fatigue shape memory alloy films. Science 348, 1004–1007 (2015).
Bannister, M. J. & Barnes, J. M. Solubility of TiO2 in ZrO2. J. Am. Ceram. Soc. 69, C269–C271 (1986).
Evirgen, A. et al. Relationship between crystallographic compatibility and thermal hysteresis in Ni-rich NiTiHf and NiTiZr high temperature shape memory alloys. Acta Mater. 121, 374–383 (2016).
Miyazaki, S. in Shape Memory Alloys (eds Fremond, M. & Miyazaki, S.) 69–147 (Springer, 1996).
Kainuma, R., Takahashi, S. & Ishida, K. Ductile shape memory alloys of the Cu-Al-Mn system. J. Phys. IV 5, 961–966 (1995).
Maki, T. Microstructure and mechanical behaviour of ferrous martensite. Mater. Sci. Forum 56–58, 157–168 (1990).
Balachandran, P. V., Broderick, S. R. & Rajan, K. Identifying the ‘inorganic gene’ for high-temperature piezoelectric perovskites through statistical learning. Proc. R. Soc. A 467, 2271–2290 (2011).
Ramprasad, R., Batra, R., Pilania, G., Mannodi-Kanakkithodi, A. & Kim, C. Machine learning in materials informatics: recent applications and prospects. npj Comput. Mater. 3, 54 (2017).
Xue, D. et al. An informatics approach to transformation temperatures of NiTi-based shape memory alloys. Acta Mater. 125, 532–541 (2017).
Meredig, B. & Wolverton, C. Dissolving the periodic table in cubic zirconia: data mining to discover chemical trends. Chem. Mater. 26, 1985–1991 (2014).
Xue, D. et al. Accelerated search for BaTiO3-based piezoelectrics with vertical morphotropic phase boundary using Bayesian learning. Proc. Natl Acad. Sci. USA 113, 13301–13306 (2016).
Yuan, R. et al. Accelerated discovery of large electrostrains in BaTiO3-based piezoelectrics using active learning. Adv. Mater. 30, 1702884 (2018).
More News
Who will make AlphaFold3 open source? Scientists race to crack AI model
These crows have counting skills previously only seen in people
Seed-stashing chickadees overturn ideas about location memory